Skip to content

Beads

ESP Tungsten Loaded Beads - 5mm ESP Tungsten Loaded Beads - 5mm
£3.95
18 in stock
ESP Tunsten Loaded Beads - 5mm These are four times heavier than the rubber versions (the difference is really noticeable) while still remaining soft and flexible. The three matt colours of weedy green, camo brown and silt grey complement the different ESP leadcore colours perfectly. Designed to be mounted on leadcore on a short section of 0.5mm silicone tube which is supplied with the beads. This provides a safe set up where the bead can come off the silicone tube and pass over the leader knot in the event of a break-off, releasing the hook link. Each packet contains 20 beads and a length of 0.5mm silicone tube, available in weedy green, camo brown and silt grey. Features: -  20 per packet -  Heavy -  Length of 0.5mm silicone tube
Fox Edges Tadpole Multi Bead Fox Edges Tadpole Multi Bead
£4.99
6 in stock
Fox Edges Tadpole Multi Bead The Tadpole Multi Bead can be used to create semi fixed running lead set ups and be used as a buffer bead for running inline/shocker inline set ups. EDGES™ The new Edges range is made up of a whole host of end tackle products that have each individually been designed to make the rigs you tie better than they have ever been. Within the range you will find leaders, hooklinks, clips, sleeves, shrink tube and gizmo’s that have been designed in conjunction with their consultant and underwater diver Rob Hughes, so that their colours and appearance best match a whole host of different lakebed make-ups – a massive ‘edge’ in itself
Fox Edges Tapered Bore Beads Trans khaki 4mm Fox Edges Tapered Bore Beads Trans khaki 4mm
£2.99
7 in stock
Fox EDGES™ Tapered Bore Beads TAPERED BORE BEADS 4mm Designed specifically for direct use onto leadcore and Submerge leaders. Ideal for positioning chods and helicopter style set ups. TAPERED BORE BEADS 6mm These shock absorbing beads have a stepped taper to sit neatly over swivels and can be used with various presentations.
Fox Edges Tulip Bead Fox Edges Tulip Bead
£3.99
2 in stock
Fox Edges Tulip Bead Product Overview Designed to create the perfect running rig, allowing the lead to hang straight on the cast. Also useful as a buffer bead on marker set ups.
Fox Edges Tungsten Beads Fox Edges Tungsten Beads
£4.29
3 in stock
Fox Edges Tungsten Beads For maximum rig concealment use tungsten beads to add weight to rigs keeping them pinned to the lake bed. When used with Tungsten Mainline Sinkers they are perfect for ‘Naked Chod’ style rigs. EDGES™ The new Edges range is made up of a whole host of end tackle products that have each individually been designed to make the rigs you tie better than they have ever been. Within the range you will find leaders, hooklinks, clips, sleeves, shrink tube and gizmo’s that have been designed in conjunction with their consultant and underwater diver Rob Hughes, so that their colours and appearance best match a whole host of different lakebed make-ups – a massive ‘edge’ in itself!
Korda Rubber Beads 4mm Korda Rubber Beads 4mm
£2.30
9 in stock
Korda 4mm Rubber Beads These were designed for use with the `Safe Zone` flying back leads. The hole inside the bead is tapered so if it is fished with the larger hole facing towards the rod then it will pass more easily over a leader knot. The small hole will then rest against the top of the anti-tangle system stopping the large bore of the back leads from sliding down the anti-tangle system which would stop the flying back lead `flying` back on the cast. Purely coincidentally it is perfect for use on the new `Safe Zone` leaders should you wish to fish them `chod` style and anchor the hook link on one of the two tungsten collars designed to hold the leader down on the lakebed. They are also ideal for the shocker rig which incorporates a running inline lead with a back stop set a few inches behind it on one of our new leaders or on a length of rig tube. I`m sure anglers will find a multitude of uses for them.
Korda Run Rig Rubbers Korda Run Rig Rubbers
£3.25
22 in stock
Korda Run Rig Rubbers `Safe Zone` Run Rig Rubbers have been specially designed for use with running rigs incorporating the `Safe Zone` Kamo Leaders Leadcore or our Kamo Rig Tube. As you`d expect from Korda these are like no other Run Rig beads available. It was while fishing at big distances on a running rig only water that Danny came up with this new idea. A shoulder has been angled on the rubber at 30 degrees this means the Big Eyed Swivel holding the lead sits at a much better angle than any standard running rig set up this will not only minimise the chance of any tangles but will also help get those extra few yards when fishing at long range. The soft rubber compound is designed to hold the swivel and rig tube securely. As with the rest of the `Safe Zone` Range we have produced these in the four key colours by matching your components to suit the lake bed you are fishing you`ll improve your results ten fold.
Pro Logic Last Meter Buffer Beads 15pc Pro Logic Last Meter Buffer Beads 15pc sale
£1.99
£1.49
1 in stock
Pro Logic Last Meter Buffer Beads Rubber shock absorbing bead/sleeve Features: 15 pc per pkt for use on running rigs,chod rigs and helicopter rigs
Pro Logic Last Meter Distance Buffer Beads 15pcs Pro Logic Last Meter Distance Buffer Beads 15pcs sale
£3.49
£1.99
2 in stock
Pro Logic Last Meter Distance Buffer Beads 15pcs Rubber shock absorbing bead/sleeve For use on running rigs, chod rigs and helicopter rigs
Pro Logic Last Meter Multi Beads 15 pcs Pro Logic Last Meter Multi Beads 15 pcs sale
£1.99
£1.49
1 in stock
Pro Logic Last Meter Multi Bead Rubber shock absorbing bead For use on running rigs, chod rigs and helicopter rigs 15 pc per pkt
Pro Logic Last Meter Standard Gripper Beads 24 pcs Pro Logic Last Meter Standard Gripper Beads 24 pcs sale
£1.99
£1.49
2 in stock
Pro Logic Last Meter Gripper Beads 24pcs Rubber shock absorbing bead Features: Universal bead for use on running rigs,chod rigs and helicopter rigs
Pro Logic Mimicry 3D Last Meter Grip Tail Beads Pro Logic Mimicry 3D Last Meter Grip Tail Beads sale
£5.99
£3.99
1 in stock
Pro Logic Mimicry 3D Last Meter Grip Tail Beads •Long tail beads for increased grip •Ideal for anti tangle tube and leadcore leader •Thick but soft construction •Shock absorber

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.