Chod & Heli Beads/Sleeves
ESP Chod Rig Sleeves Weedy Green
4 in stock
ESP Chod Rig Sleeve Weedy Green These sleeves are the first of their kind on the market, designed to be used in conjunction with the chod rig and serve two main purposes: - Typically a chod rig hook link is 2 – 3 inches long and by using the sleeve it prevents the hook from coming into contact with the lead. - The soft, flexible silicone sleeve acts as a buffer-like shock absorber when playing fish on a very short hook link. Under pressure the sleeve will ‘concertina’ absorbing the lunges of the fish and helping to prevent breakages or hook pulls. The flexible silicone tube is mounted onto a soft sleeve which houses the lead retaining clip and provides a neat, streamlined system. You might wonder why this component is comprised of two parts, rather than being moulded as one piece. Well, the thermoplastic rubber used to mould the clip link retaining sleeve is malleable yet tough and is perfect for sleeving the clip link yet does not have the soft flexibility and inherent ‘spring’ of good old silicone tube so ESP have combined the two materials to create the perfect shock absorber buffer sleeve for chod rig work. The silicone tube can be shortened if required, as can the clip retaining sleeve if the leader is tied directly to the lead loop. Available in translucent camo brown, weedy green and choddy silt to complement ESP Leadcore
ESP Helicopter Sleeve Weedy Green
7 in stock
ESP Helicopter Sleeves - Designed to act as a buffer between your heli rig and swivel, these heli beads are perfect for protecting your knots during hard fights. - Contains 10 sleeves
Fox Edges Chod / Heli Buffer Sleeves
2 in stock
Fox Edges Buffer Sleeve Designed to protect the main line and offer protection when playing fish on Naked Chod/Helicopter rigs. The tapered sleeve can be cut down for use with various leader materials. FEATURES • Designed for Chod rigs and Helicopter rigs when fishing with fluorocarbon or mono main line straight through • The swivel of your rig will sit on the think, tapered sleeve, which will absorb the pressure when playing a carp and prevent the swivel damaging the line • Has a small hole in the side which allows you to set it up in a way that the lead can be ejected EDGES™ The new Edges range is made up of a whole host of end tackle products that have each individually been designed to make the rigs you tie better than they have ever been. Within the range you will find leaders, hooklinks, clips, sleeves, shrink tube and gizmo’s that have been designed in conjunction with their consultant and underwater diver Rob Hughes, so that their colours and appearance best match a whole host of different lakebed make-ups – a massive ‘edge’ in itself!
Fox Edges Trans Khaki Heli Buffer Sleeves
11 in stock
Fox EDGES™ Heli Buffer Sleeve - Designed to protect the main line and offer protection when playing fish on Naked Chod/Helicopter rigs. The tapered sleeve can be cut down for use with various leader materials.
Fox Edges Tungsten Chod Bead Kit
9 in stock
Fox Edges Tungsten Chod Bead Kit Tungsten Chod Bead kits have been manufactured in a semi translucent khaki colour to blend in on the lake bed and are weighted to ensure maximum rig concealment. Designed for use direct onto the mainline without a leader. During the fight the bead slides down the mainline onto the buffer sleeve. The buffer sleeves also feature a moulded hole to allow the rig to be set up with a drop off lead.
Fox Edges Tungsten Line Guard Beads
2 in stock
Fox Edges Tungsten Line Guard Beads These Tungsten Line Guard Beads are designed for anglers to use directly onto naked main line. Can be fixed up the line for use with Naked Chod Rigs, and will slide down to the Heli Buffer Sleeve that sits over your lead once a fish is hooked. They have a handy tapered side that your swivel will sit on during the fight to ensure your naked line is not damaged when playing hard-fighting carp. The Line Guards can also be used on traditional helicopter style set-ups too and have been designed to sit neatly on top of the Edges Heli Buffer Sleeve. The tungsten content in each bead helps to pin them to the lakebed. There are 8 Tungsten Line Guard Beads per packet each supplied on a wire loop. 8 beads per Pkt
Korda Heli Safe Lead Release System
8 in stock
Korda Heli Safe Lead Release System Korda have been working on a solution to a problem that anglers been faced with for some time, how to safely and consistently discharge the lead when fishing with a helicopter setup. In order to be a true game-changing product, the Heli-Safe had to fulfill some important criteria… One such criterion was the ability to fish chod rigs at range. The heavy leads needed to fish at long range often become a problem once a fish is hooked. The combination of a very short hook link and large lead would often result in dropped fish. Likewise, venues that had been choked by weed often dictated that dropping the lead was paramount, something that just isn’t consistently possible with conventional systems. The demand from anglers to produce a drop-off lead system for use in these situations pushed us to develop the product you see before you. The Heli-Safe System enables you to drop the lead when the situation calls for it. When used in conjunction with our unique Helicopter Safety System and unique No-Trace Beads, you can fish a rotary-rig setup in situations that would have previously led to the loss of hooked fish. The system works by employing a pressure-release function, not seen in the angling world until now. The latched lead clip will open once a hooked fish pulls against the angler, allowing the lead to drop free. By threading a Barrel Bead onto the leader above the Heli Safe, you will prevent the lead from discharging, should you pick up weed or other detritus on the retrieve. Once engaged in battle though, the bead will simply pull down and allow the lead to discharge. The unique design enables the angler to choose when to drop the lead, and when to retain it. In situations where it’s not necessary to discharge the lead, a small plastic collar (which is supplied in the kit) can be fitted to fix the lead in place.
Korda Helicopter Sleeves
20 in stock
Korda Hlicopter sleeves The Korda `Safe Zone` Helicopter Sleeve has been specifically designed to cover a Korda Kwik link when it is attached to a `Safe Zone` Kamo Leader when using a helicopter or chod style set up. It stops tangles and grips the Kwik Link using a special rubber compound.
Pro Logic Chod Buffer Beads 15 pc
3 in stock
Pro logic Chod Buffer A two part buffer bead designed for chod rigs Can be used for fixed chods on soft core and lead core leaders or running chods with monofilament
Pro Logic Last meter Drop Beads
4 in stock
Pro Logic Last Meter Drop Beads Rubber shock absorbing bead Features: Universal bead for use on running rigs,chod and helicopter rigs Tear drop shape designed to reduce friction and help with swivel rotation Designed to be used above and below the rig swivel to lock the rig on soft core leader and lead core leaders
Pro Logic Last Meter Ultra Grip Beads
2 in stock
Pro Logic Last Meter Ultragrip Beads A grip bead for use on Chod rigs, helicopter rigs and run rigs as a shock bead Designed to grip the leader material to form a stop or buffer for the rig Features : 20 beads per pkt Perfect for chod rigs Stop or buffer bead