Skip to content

Reels

Daiwa Legalis LT 3000D-C Daiwa Legalis LT 3000D-C save
£89.99
£64.99
Combo Up. Buy a rod & reel for 5% off
1 in stock
Daiwa Legalis LT 3000D-C A part of Daiwa’s Light and Tough initiative, the Daiwa Legalis LT Spinning Reels provide airy performance that stands head-and-shoulders above other reels in its class. Encased in a carbon light material housing, the Daiwa Legalis LT Spinning Reels offer outstanding smoothness thanks to Daiwa’s Air Rotor and Air Bail, which work to provide effortless, and incredibly light performance. Complete with a machined aluminum handle for increased control and comfort, the Daiwa Legalis LT Spinning Reels offer enhanced design that is head-and-shoulders above its competitors in its price range. 5.3.1 Ratio Reel Weight 215g Max Drag 10kg/22lb 220y of 12lb Mono
Shimano Stradic 1000 HGFK Shimano Stradic 1000 HGFK freepost
£179.99
£164.99
Combo Up. Buy a rod & reel for 5% off
2 in stock
Shimano Stradic 1000 HGFK Brand new design Stradic from Shimano ,This reel is stronger ,lighter and smoother than its predecessors. The origional Stradics complemented with improved specification including more ball bearings and advanced X-Ship gearing for super smooth, reliable performance. These now benefit from a higher speed retrieve ratio (minimum 6.0:1)whilst the larger 4000 and 5000 deliver more power and torque with a 6.2:1 retrieve. As with previous Stradic models the smooth front drag is reliable and faultless in its performance. The 1000 size is a good general purpose spinning reel size and will comfortably hold 150 yards of 10lb braid. It will balance best on rods 6ft - 8ft in length. Features: •X-Ship •Hagane Gear •Hagane Body •AR-C Spool •6 Shielded A-RB & 1 roller bearing •Front drag •Capacity 140yds of 4lb (0.25mm) •Ratio 6:1 Bearings : 6 Shielded A-RB & 1 roller bearing Line lay : Aerowrap II + 1-speed Handle : Single machined aluminium Body material : Diecast aluminium/XGT-7 Spool material : Cold forged aluminium Maintenance port : No Waterproof drag : Yes
Abu Silver Max Right Hand Abu Silver Max Right Hand save
£74.99
£64.99
Combo Up. Buy a rod & reel for 5% off
1 in stock
Abu Silver Max Right Hand The Abu Silver Max Puts performance at your finger tips with a five bearing system with an additional instant anti-reverse bearing to ensure smooth retrieves. The upgraded design includes a light weight graphite frame and side plate in addition to the signature MagTrax™ brake system that provides precise cast control. Performance and toughness are hallmarks of the Max family, and the flipping switch included on this reel provides a swift means for casting jigs and plastics with just a touch of the thumb. Features: • 5 stainless steel ball bearings + 1 roller bearing provides smooth operation • Machined aluminum spool provides strength without adding excess weight • Power Disk™ drag system gives smooth drag performance • Duragear™ brass gear for extended gear life • MagTrax™ brake system gives consistent brake pressure throughout the cast • Capacity 145yds 12lb mono • Lightweight one piece graphite frame and graphite sideplates • Flipping switch included
Daiwa 18 Exist LT 1000D PG Daiwa 18 Exist LT 1000D PG save
£650.00
£585.00
Combo Up. Buy a rod & reel for 5% off
Available to order
Daiwa 18 Exist LT 1000D PG    New for 2018 NEW for 2018 Daiwa brings to the world the most advanced, technology laden spin reel we’ve ever made. The Exist LT range will be a new chapter in spinning reel history The landscape changed with the introduction of Daiwa’s LT Concept. A concept that allowed Light and Tough to coexist, and Daiwa’s dream to become a reality of bringing both elements to reel design. MONOCOQUE BODY technology enables both compactness and robustness to be achieved. Lean and mean and devoid of unrequired bulk, MONOCOQUE creates an ultra light, ultra strong body without peer. A redesigned uber thin spool further enhances weight reduction in the feather light 18EXIST, and allows the effortless, functional synergy, between angler and reel to be achieved. For an angler, silence is golden! Being able to eliminate unwanted sounds, so you can key in on angling cues and sounds, is vital. To help achieve this oneness with your angling environment Daiwa strived to make the 18Exist whisper quiet by significantly reducing rotational noise. This has been achieved by employing newly developed, TOUGH DIGIGEAR technology. Ultraprecise machining achieves ideal gear teeth surfaces that significantly reduce gear meshing noise during winding rotation. The reel also features a collection of other technologies and designs that reduce noise, including a Zaion Air Rotor that reduces inertia for light and smooth winding, and the sturdy MONOCOQUE BODY that almost completely eliminates gear shifts and rattles. Creating a reel that performs at peak performance over a long period, is the quintessential definition of ultimate durability. Reels of the past have fallen short in this area, and have waned in performance over time, when subjected to prolonged use and environmental conditions. The search for the holy grail in protecting and maintaining performance was found with MAGSEALED. The 18EXIST is equipped with MAGSEALED technology, to protect its line roller, main shaft, and drive gear shaft, and now combined with the use of the seamless MONOCOQUE BODY technology, greatly reduces the penetration of water and dust into the reel to minimise corrosion and promote longer life and better performance. By thoroughly and steadily implementing technologies one by one, EXIST has achieved ultimate durability. Features 4.9.1 Ratio Line Capacity Mono 160y-6lb - Braid 200y - 8lb Weight 5.5oz Max drag 11lb Bearings 12BB - 1RB 24.1" Line per handle turn
Daiwa 18 Exist LT 2000D PG Daiwa 18 Exist LT 2000D PG save
£675.00
£599.00
Combo Up. Buy a rod & reel for 5% off
Available to order
Daiwa 18 Exist LT 2000D PG    New for 2018 NEW for 2018 Daiwa brings to the world the most advanced, technology laden spin reel we’ve ever made. The Exist LT range will be a new chapter in spinning reel history The landscape changed with the introduction of Daiwa’s LT Concept. A concept that allowed Light and Tough to coexist, and Daiwa’s dream to become a reality of bringing both elements to reel design. MONOCOQUE BODY technology enables both compactness and robustness to be achieved. Lean and mean and devoid of unrequired bulk, MONOCOQUE creates an ultra light, ultra strong body without peer. A redesigned uber thin spool further enhances weight reduction in the feather light 18EXIST, and allows the effortless, functional synergy, between angler and reel to be achieved. For an angler, silence is golden! Being able to eliminate unwanted sounds, so you can key in on angling cues and sounds, is vital. To help achieve this oneness with your angling environment Daiwa strived to make the 18Exist whisper quiet by significantly reducing rotational noise. This has been achieved by employing newly developed, TOUGH DIGIGEAR technology. Ultraprecise machining achieves ideal gear teeth surfaces that significantly reduce gear meshing noise during winding rotation. The reel also features a collection of other technologies and designs that reduce noise, including a Zaion Air Rotor that reduces inertia for light and smooth winding, and the sturdy MONOCOQUE BODY that almost completely eliminates gear shifts and rattles. Creating a reel that performs at peak performance over a long period, is the quintessential definition of ultimate durability. Reels of the past have fallen short in this area, and have waned in performance over time, when subjected to prolonged use and environmental conditions. The search for the holy grail in protecting and maintaining performance was found with MAGSEALED. The 18EXIST is equipped with MAGSEALED technology, to protect its line roller, main shaft, and drive gear shaft, and now combined with the use of the seamless MONOCOQUE BODY technology, greatly reduces the penetration of water and dust into the reel to minimise corrosion and promote longer life and better performance. By thoroughly and steadily implementing technologies one by one, EXIST has achieved ultimate durability. Features 4.9.1 Ratio Line Capacity Mono 220y-6lb - Braid 215y - 10lb Weight 5.5oz Max drag 11lb Bearings 12BB - 1RB 25.3" Line per handle turn Reel sizes from 1000 - 4000
Daiwa 18 Exist LT 2500 XH G Daiwa 18 Exist LT 2500 XH G save
£699.99
£630.00
Combo Up. Buy a rod & reel for 5% off
Available to order
Daiwa 18 Exist LT 2500 XH G     New for 2018 NEW for 2018 Daiwa brings to the world the most advanced, technology laden spin reel we’ve ever made. The Exist LT range will be a new chapter in spinning reel history The landscape changed with the introduction of Daiwa’s LT Concept. A concept that allowed Light and Tough to coexist, and Daiwa’s dream to become a reality of bringing both elements to reel design. MONOCOQUE BODY technology enables both compactness and robustness to be achieved. Lean and mean and devoid of unrequired bulk, MONOCOQUE creates an ultra light, ultra strong body without peer. A redesigned uber thin spool further enhances weight reduction in the feather light 18EXIST, and allows the effortless, functional synergy, between angler and reel to be achieved. For an angler, silence is golden! Being able to eliminate unwanted sounds, so you can key in on angling cues and sounds, is vital. To help achieve this oneness with your angling environment Daiwa strived to make the 18Exist whisper quiet by significantly reducing rotational noise. This has been achieved by employing newly developed, TOUGH DIGIGEAR technology. Ultraprecise machining achieves ideal gear teeth surfaces that significantly reduce gear meshing noise during winding rotation. The reel also features a collection of other technologies and designs that reduce noise, including a Zaion Air Rotor that reduces inertia for light and smooth winding, and the sturdy MONOCOQUE BODY that almost completely eliminates gear shifts and rattles. Creating a reel that performs at peak performance over a long period, is the quintessential definition of ultimate durability. Reels of the past have fallen short in this area, and have waned in performance over time, when subjected to prolonged use and environmental conditions. The search for the holy grail in protecting and maintaining performance was found with MAGSEALED. The 18EXIST is equipped with MAGSEALED technology, to protect its line roller, main shaft, and drive gear shaft, and now combined with the use of the seamless MONOCOQUE BODY technology, greatly reduces the penetration of water and dust into the reel to minimise corrosion and promote longer life and better performance. By thoroughly and steadily implementing technologies one by one, EXIST has achieved ultimate durability. Features 6.2.1 Ratio Line Capacity Mono 110y-8lb - Braid 170y - 20lb Weight 6.3oz Max drag 22lb Bearings 12BB - 1RB 34.5" Line per handle turn Reel sizes from 1000 - 4000
Daiwa 18 Exist LT 2500D G Daiwa 18 Exist LT 2500D G save
£725.00
£630.00
Combo Up. Buy a rod & reel for 5% off
Available to order
Daiwa 18 Exist LT 2500D G     New for 2018 NEW for 2018 Daiwa brings to the world the most advanced, technology laden spin reel we’ve ever made. The Exist LT range will be a new chapter in spinning reel history The landscape changed with the introduction of Daiwa’s LT Concept. A concept that allowed Light and Tough to coexist, and Daiwa’s dream to become a reality of bringing both elements to reel design. MONOCOQUE BODY technology enables both compactness and robustness to be achieved. Lean and mean and devoid of unrequired bulk, MONOCOQUE creates an ultra light, ultra strong body without peer. A redesigned uber thin spool further enhances weight reduction in the feather light 18EXIST, and allows the effortless, functional synergy, between angler and reel to be achieved. For an angler, silence is golden! Being able to eliminate unwanted sounds, so you can key in on angling cues and sounds, is vital. To help achieve this oneness with your angling environment Daiwa strived to make the 18Exist whisper quiet by significantly reducing rotational noise. This has been achieved by employing newly developed, TOUGH DIGIGEAR technology. Ultraprecise machining achieves ideal gear teeth surfaces that significantly reduce gear meshing noise during winding rotation. The reel also features a collection of other technologies and designs that reduce noise, including a Zaion Air Rotor that reduces inertia for light and smooth winding, and the sturdy MONOCOQUE BODY that almost completely eliminates gear shifts and rattles. Creating a reel that performs at peak performance over a long period, is the quintessential definition of ultimate durability. Reels of the past have fallen short in this area, and have waned in performance over time, when subjected to prolonged use and environmental conditions. The search for the holy grail in protecting and maintaining performance was found with MAGSEALED. The 18EXIST is equipped with MAGSEALED technology, to protect its line roller, main shaft, and drive gear shaft, and now combined with the use of the seamless MONOCOQUE BODY technology, greatly reduces the penetration of water and dust into the reel to minimise corrosion and promote longer life and better performance. By thoroughly and steadily implementing technologies one by one, EXIST has achieved ultimate durability. Features 6.2.1 Ratio Line Capacity Mono 110y-8lb - Braid 170y - 20lb Weight 6.3oz Max drag 22lb Bearings 12BB - 1RB 34.5" Line per handle turn Reel sizes from 1000 - 4000
Daiwa 18 Exist LT 3000C XH G Daiwa 18 Exist LT 3000C XH G save
£725.00
£650.00
Combo Up. Buy a rod & reel for 5% off
Available to order
Daiwa 18 Exist LT 3000 XH G     New for 2018 NEW for 2018 Daiwa brings to the world the most advanced, technology laden spin reel we’ve ever made. The Exist LT range will be a new chapter in spinning reel history The landscape changed with the introduction of Daiwa’s LT Concept. A concept that allowed Light and Tough to coexist, and Daiwa’s dream to become a reality of bringing both elements to reel design. MONOCOQUE BODY technology enables both compactness and robustness to be achieved. Lean and mean and devoid of unrequired bulk, MONOCOQUE creates an ultra light, ultra strong body without peer. A redesigned uber thin spool further enhances weight reduction in the feather light 18EXIST, and allows the effortless, functional synergy, between angler and reel to be achieved. For an angler, silence is golden! Being able to eliminate unwanted sounds, so you can key in on angling cues and sounds, is vital. To help achieve this oneness with your angling environment Daiwa strived to make the 18Exist whisper quiet by significantly reducing rotational noise. This has been achieved by employing newly developed, TOUGH DIGIGEAR technology. Ultraprecise machining achieves ideal gear teeth surfaces that significantly reduce gear meshing noise during winding rotation. The reel also features a collection of other technologies and designs that reduce noise, including a Zaion Air Rotor that reduces inertia for light and smooth winding, and the sturdy MONOCOQUE BODY that almost completely eliminates gear shifts and rattles. Creating a reel that performs at peak performance over a long period, is the quintessential definition of ultimate durability. Reels of the past have fallen short in this area, and have waned in performance over time, when subjected to prolonged use and environmental conditions. The search for the holy grail in protecting and maintaining performance was found with MAGSEALED. The 18EXIST is equipped with MAGSEALED technology, to protect its line roller, main shaft, and drive gear shaft, and now combined with the use of the seamless MONOCOQUE BODY technology, greatly reduces the penetration of water and dust into the reel to minimise corrosion and promote longer life and better performance. By thoroughly and steadily implementing technologies one by one, EXIST has achieved ultimate durability. Features 6.2.1 Ratio Line Capacity Mono 130y-10lb - Braid 160y - 20lb Weight 6.5oz Max drag 22lb Bearings 12BB - 1RB 36.8" Line per handle turn Reel sizes from 1000 - 4000
Daiwa 18 Exist LT 3000D CG Daiwa 18 Exist LT 3000D CG save
£725.00
£650.00
Combo Up. Buy a rod & reel for 5% off
Available to order
Daiwa 18 Exist LT 3000D CG     New for 2018 NEW for 2018 Daiwa brings to the world the most advanced, technology laden spin reel we’ve ever made. The Exist LT range will be a new chapter in spinning reel history The landscape changed with the introduction of Daiwa’s LT Concept. A concept that allowed Light and Tough to coexist, and Daiwa’s dream to become a reality of bringing both elements to reel design. MONOCOQUE BODY technology enables both compactness and robustness to be achieved. Lean and mean and devoid of unrequired bulk, MONOCOQUE creates an ultra light, ultra strong body without peer. A redesigned uber thin spool further enhances weight reduction in the feather light 18EXIST, and allows the effortless, functional synergy, between angler and reel to be achieved. For an angler, silence is golden! Being able to eliminate unwanted sounds, so you can key in on angling cues and sounds, is vital. To help achieve this oneness with your angling environment Daiwa strived to make the 18Exist whisper quiet by significantly reducing rotational noise. This has been achieved by employing newly developed, TOUGH DIGIGEAR technology. Ultraprecise machining achieves ideal gear teeth surfaces that significantly reduce gear meshing noise during winding rotation. The reel also features a collection of other technologies and designs that reduce noise, including a Zaion Air Rotor that reduces inertia for light and smooth winding, and the sturdy MONOCOQUE BODY that almost completely eliminates gear shifts and rattles. Creating a reel that performs at peak performance over a long period, is the quintessential definition of ultimate durability. Reels of the past have fallen short in this area, and have waned in performance over time, when subjected to prolonged use and environmental conditions. The search for the holy grail in protecting and maintaining performance was found with MAGSEALED. The 18EXIST is equipped with MAGSEALED technology, to protect its line roller, main shaft, and drive gear shaft, and now combined with the use of the seamless MONOCOQUE BODY technology, greatly reduces the penetration of water and dust into the reel to minimise corrosion and promote longer life and better performance. By thoroughly and steadily implementing technologies one by one, EXIST has achieved ultimate durability. Features 5.2.1 Ratio Line Capacity Mono 220y-12lb - Braid 230y - 30lb Weight 6.5oz Max drag 22lb Bearings 12BB - 1RB 30.6" Line per handle turn Reel sizes from 1000 - 4000
Daiwa 18 Exist LT 4000D CG Daiwa 18 Exist LT 4000D CG save
£750.00
£675.00
Combo Up. Buy a rod & reel for 5% off
Available to order
Daiwa 18 Exist LT 4000D CG     New for 2018 NEW for 2018 Daiwa brings to the world the most advanced, technology laden spin reel we’ve ever made. The Exist LT range will be a new chapter in spinning reel history The landscape changed with the introduction of Daiwa’s LT Concept. A concept that allowed Light and Tough to coexist, and Daiwa’s dream to become a reality of bringing both elements to reel design. MONOCOQUE BODY technology enables both compactness and robustness to be achieved. Lean and mean and devoid of unrequired bulk, MONOCOQUE creates an ultra light, ultra strong body without peer. A redesigned uber thin spool further enhances weight reduction in the feather light 18EXIST, and allows the effortless, functional synergy, between angler and reel to be achieved. For an angler, silence is golden! Being able to eliminate unwanted sounds, so you can key in on angling cues and sounds, is vital. To help achieve this oneness with your angling environment Daiwa strived to make the 18Exist whisper quiet by significantly reducing rotational noise. This has been achieved by employing newly developed, TOUGH DIGIGEAR technology. Ultraprecise machining achieves ideal gear teeth surfaces that significantly reduce gear meshing noise during winding rotation. The reel also features a collection of other technologies and designs that reduce noise, including a Zaion Air Rotor that reduces inertia for light and smooth winding, and the sturdy MONOCOQUE BODY that almost completely eliminates gear shifts and rattles. Creating a reel that performs at peak performance over a long period, is the quintessential definition of ultimate durability. Reels of the past have fallen short in this area, and have waned in performance over time, when subjected to prolonged use and environmental conditions. The search for the holy grail in protecting and maintaining performance was found with MAGSEALED. The 18EXIST is equipped with MAGSEALED technology, to protect its line roller, main shaft, and drive gear shaft, and now combined with the use of the seamless MONOCOQUE BODY technology, greatly reduces the penetration of water and dust into the reel to minimise corrosion and promote longer life and better performance. By thoroughly and steadily implementing technologies one by one, EXIST has achieved ultimate durability. Features 5.2.1 Ratio Line Capacity Mono 250y-14lb - Braid 230y - 30lb Weight 7.2oz Max drag 22lb Bearings 12BB - 1RB 32.5" Line per handle turn Reel sizes from 1000 - 4000
Daiwa BG Magsealed 4000 Daiwa BG Magsealed 4000 save
£189.99
£159.99
Combo Up. Buy a rod & reel for 5% off
1 in stock
Daiwa BG Magsealed 4000 - Saltwater Proof Technological evolution of the BG, the bestseller saltwater Proof reel on the market today.The new version implements the famous Daiwa Magsealed technology. Thanks to this technical improvement the BG Magsealed are even more resistant to the stress caused by fishing in the marine environment and allow excellent performance over time, even with reduced maintenance. Confirmed the fantastic clutch ATD - Automatic Tournament Drag - which allows you to fish at the limit of breaking load even with thin lines, because it eliminates the dreadful effect 'stuck clutch'. The internal gears are of the Digigear II type, with oversized control wheel. Features: 4000 Size reel 5.7.1 Ratio 340m of 20lb Braid Reel Weight 435g 8kg Max Drag Hard Bodyz body in anodised aluminum Rotor Air Rotor Magsealed technology
Daiwa Fuego LT 2000-D Daiwa Fuego LT 2000-D save
£109.99
£79.99
Combo Up. Buy a rod & reel for 5% off
2 in stock
Daiwa Fuego LT 2000D The new Fuego LT series of spinning reels, state of the art fishing tools that define Daiwa’s commitment to the LT Concept of lighter, tougher material. With conventional, heavier spinning reels, long hours of casting and retrieving can fatigue the arms and hands.The Fuego LT housing is light but sturdy constructed from a Carbon based material. The innovative Magsealed main shaft delivers butter smooth performance while preventing water or dirt intrusion. The technology uses a Mag Oil that can be magnetically solidified similar to a packing on a boat’s propeller shaft. Oil smooth operation as well as a water and impurities barrier makes the design and function unparalleled. The Machined Aluminum handle is ergonomically correct and screws easily into the body. Six ball bearings and one roller bearing combine to create the ultimate in silky smooth operation. If you are looking for an amazing reel packed with high-end design and technology features then the Daiwa’s Fuego LT may be the reel for you. Features- 5.2.1 ratio Reel weight 185g 5kg Drag Aluminum screw in handle 300m 0f 0.10mm braid MAG SEALED
Nomura Hiro FW 3000 Nomura Hiro FW 3000 save
£69.99
Combo Up. Buy a rod & reel for 5% off
1 in stock
Nomura Hiro FW 3000 Reel This high speed spinning reel from Nomura is an absolute gem. Just look at the outstanding features it has, You will realise it’s a lot of reel for the money. With a carbon body and rotor Nomura have managed to take away extra unwanted weight, incorporate this with its strong gearing system you have got a reliable spinning reel that you can rely on when it matters the most . Perfect for Salt-water Bass / Pollock lure fishing from the shore when using braid. Feaures : Ratio 6.3:1 Capacity 215 mt 0.25mm Braid (165yds 10lb Mono) 7+1 Bearings One Way Clutch Over Sized Power Bail Low friction Carbon Rotor Advanced computer designed Rotor CNC Metal Power Handle Ergonomic new EVA Knob Spare Graphite Spool
Nomura Kanji FW 30 Reel Nomura Kanji FW 30 Reel save
£54.99
£39.99
Combo Up. Buy a rod & reel for 5% off
2 in stock
Nomura Kanji 3000 SW Front Drag This 3000 size reel is a perfect all-round spinning reel for Lure fishing from the shore ,Spinning from the boat for Bass ,Pollock Etc,or Fresh water Salmon,Trout & Pike fishing . The special shape with lightened inserts increases ergonomics and usability of the reel. The attractive look is combined with hi-end features.With 12 steel ball bearings, machined aluminum lightened handle, micrometric high precision drag, 1 Forged aluminum spool and 2 graphite spare spools. This Kanji 3000 FW is a little masterpiece. Features: Capacity 245 Mt 0.25mm Braid (185yds 10lb Mono) Ratio 5.1:1 One Way Clutch 11 +1 Bearings Anti Twist Power Roller Over sized Power Bail Ergonomic Rubber Soft Touch Handle 2 x Spare Graphite Spools
Okuma Epixor LS 30 Okuma Epixor LS 30 sale
£74.99
£40.00
Combo Up. Buy a rod & reel for 5% off
2 in stock
Okuma Epixor LS Spinning Okuma Epixor LS spinning reels are the next generation of a long standing family of spinning reels by Okuma. Designed with C-40X carbon fiber composite construction and featuring Torsion Control Armor (TCA), these advanced technologies provide a reel that is light weight with both exceptional feel and rock solid durability. Torsion Control Armor (TCA) The one-piece TCA design was built using Okuma C-40X carbon fiber technology and made with a double arm design. Compared to traditional single side designs, TCA’s double arm offers higher torsion and flex resistance under heavy pressure for improved strength. This not only makes the reel lighter but also extremely rigid ensuring the internal parts stays in perfect alignment. Cyclonic Flow Rotor (CFR) Cyclonic Flow Rotor (CFR) was designed to create “cyclonic” airflow, which significantly increases air around the rotor, beneath and around the spool, with every turn of the handle. This thoroughly tested design allows for a much faster drying time if the reel becomes wet, minimizing corrosion and extending longevity of the reel. Centrifugal Disc Bail (CDB) The Centrifugal Disc Bail (CDB) design incorporates a heavier brass disc that is perfectly weighted and balanced to create smoother bail operations. CDB increases the strength and stability of bail functions. C-40X Okuma’s C-40X long strand carbon fiber technology utilizes a special blended graphite polymer. The carbon fibers in this material are elongated and reinforced, which creates a substantially stronger composite than standard graphite. At 25% lighter, 50% stronger and 100% anti-corrosive, the Epixor XT's carbon fiber frame and side plate are extremely lightweight and durably constructed. Progressive Drag Okuma’s 1-K woven carbon fiber drag knob is light weight and creates progressive drag settings. Our progressive drag allows you to customize settings to specific conditions and fish or adjust your drag during a long fight. 5.0.1 Ratio 300y x 0.20mm 8kg Max Drag 258g
Okuma Epixor XT 50 Okuma Epixor XT 50 sale
£99.99
£50.00
Combo Up. Buy a rod & reel for 5% off
1 in stock
Okuma Epixor XT 50 Spinning Reel Okuma Epixor XT spinning reels are the next generation of a long standing family of spinning reels by Okuma. Designed with C-40X carbon fiber composite construction and featuring Torsion Control Armor (TCA), these advanced technologies provide a reel that is light weight with both exceptional feel and rock solid durability. Torsion Control Armor (TCA) The one-piece TCA design was built using Okuma C-40X carbon fiber technology and made with a double arm design. Compared to traditional single side designs, TCA’s double arm offers higher torsion and flex resistance under heavy pressure for improved strength. This not only makes the reel lighter but also extremely rigid ensuring the internal parts stays in perfect alignment. Cyclonic Flow Rotor (CFR) Cyclonic Flow Rotor (CFR) was designed to create “cyclonic” airflow, which significantly increases air around the rotor, beneath and around the spool, with every turn of the handle. This thoroughly tested design allows for a much faster drying time if the reel becomes wet, minimizing corrosion and extending longevity of the reel. Centrifugal Disc Bail (CDB) The Centrifugal Disc Bail (CDB) design incorporates a heavier brass disc that is perfectly weighted and balanced to create smoother bail operations. CDB increases the strength and stability of bail functions. C-40X Okuma’s C-40X long strand carbon fiber technology utilizes a special blended graphite polymer. The carbon fibers in this material are elongated and reinforced, which creates a substantially stronger composite than standard graphite. At 25% lighter, 50% stronger and 100% anti-corrosive, the Epixor XT's carbon fiber frame and side plate are extremely lightweight and durably constructed. Progressive Drag Okuma’s 1-K woven carbon fiber drag knob is light weight and creates progressive drag settings. Our progressive drag allows you to customize settings to specific conditions and fish or adjust your drag during a long fight. 5.0.1 Ratio 239y x 0.30mm 10kg Max Drag 304g in weight
Okuma Fina Pro XP FPX-40 Okuma Fina Pro XP FPX-40 sale
£26.99
£15.00
Combo Up. Buy a rod & reel for 5% off
2 in stock
Okuma Fina Pro XP FPX 40 Front Drag This Reel is perfect as a starter reel or a second reel.Don't be put off by the low price just look at the features. Features : Multi-disc Precision drag Ratio 5.0:1 Capacity 230 yds 10lb mono Japanese oiled felt drag system 1+1 BB Drive System Quick set Anti reverse roller bearing Precision machine cut Brass pinion gear Corrosion resistant graphite body Elliptical gearing system Machined alumium,2 tone anodized spool Computer balanced Rotor Equalizing system LCS line control Spool
Okuma Jaw 20 Spinning Reel Okuma Jaw 20 Spinning Reel save
£29.99
Combo Up. Buy a rod & reel for 5% off
4 in stock
Okuma Jaw 20 spinning Reel The New limited range of Okuma JAW spinning reels. This limited series has been designed to complement our best-selling spinning rods the Savage Gear MPP2. With features like these you are see why it would make a great combo for any lure/pike angler. Features Ratio 5.8.1 Line Cap 110y x 6lb mono 5kg max drag 3 Ball bearings + 1 roller bearing Quick-Set anti-reverse system Machine machined brass gears Machine machineded Aluminium coil Thin and solid graphite body Solid metal handle with TPE end cap Rotor Equalizing System – Computer Balanced CFR: Cyclonic Flow Rotor – a special rotor creates a flow that dramatically accelerates the drying process Fits well with the SG MPP2
Okuma Jaw 30 Spinning Reel Okuma Jaw 30 Spinning Reel save
£29.99
Combo Up. Buy a rod & reel for 5% off
10 in stock
Okuma Jaw 30 spinning Reel The New limited range of Okuma JAW spinning reels. This limited series has been designed to complement our best-selling spinning rods the Savage Gear MPP2. With features like these you are see why it would make a great combo for any lure/pike angler. In sizes 20 - 30 - 40  Desiged to suit rods from 7ft - 10ft Features Ratio 5.0.1 Line Cap 200y x 8lb mono 7kg max drag 3 Ball bearings + 1 roller bearing Machine machined brass gears Quick-Set anti-reverse system Machine machineded Aluminium coil Thin and solid graphite body Solid metal handle with TPE end cap CFR: Cyclonic Flow Rotor – a special rotor creates a flow that dramatically accelerates the drying process Rotor Equalizing System – Computer Balanced Fits well with the SG MPP
Okuma Jaw 40 Spinning Reel Okuma Jaw 40 Spinning Reel save
£34.99
Combo Up. Buy a rod & reel for 5% off
7 in stock
Okuma Jaw 40 spinning Reel The New limited range of Okuma JAW spinning reels. This limited series has been designed to complement our best-selling spinning rods the Savage Gear MPP2. With features like these you are see why it would make a great combo for any lure/pike angler. In sizes 20 - 30 - 40  Desiged to suit rods from 7ft - 10ft Features Ratio 5.0.1 Line Cap 220y x 10lb mono 8kg max drag 3 Ball bearings + 1 roller bearing Machine machined brass gears Quick-Set anti-reverse system Machine machineded Aluminium coil Thin and solid graphite body Solid metal handle with TPE end cap Rotor Equalizing System – Computer Balanced CFR: Cyclonic Flow Rotor – a special rotor creates a flow that dramatically accelerates the drying process Fits well with the SG MPP
Penn Conflict II 5000 LC Longcast Penn Conflict II 5000 LC Longcast save
£179.99
£159.99
Combo Up. Buy a rod & reel for 5% off
1 in stock
Penn Conflict II 5000 LC The Conflict II 5000 LC is set to be one of the most go to reels for using with bass rods. lightweight Strong and ready for anything. The New PENN Conflict II Long Cast features stealthy cosmetics, a Lightweight design, and silky smooth HT-100 drag. The RR30 Rigid resin body and rotor are extremely lightweight and durable. Internally. The Conflict II Long Cast is powered with our CNC Gear Technology, and high quality stainless steel ball bearings. With the Superline Spool, no backing is needed because of the rubber gasket that keeps superlines from slipping. Features 4.8.1 ratio 15lb max drag 310y x 10lb mono Rigid resin rr30 body and rotor 7+1 sealed stainless ball bearing system superline spool Line capcity rings
Penn Conflict II 6000 LC Longcast Penn Conflict II 6000 LC Longcast save
£189.99
£169.99
Combo Up. Buy a rod & reel for 5% off
Available to order
Penn Conflict II 6000 LC  Due in November The Conflict II 6000 LC is set to be one of the most go to reels for using with bass rods. Lightweight, Strong and ready for anything. The New PENN Conflict II Long Cast features stealthy cosmetics, a Lightweight design, and silky smooth HT-100 drag. The RR30 Rigid resin body and rotor are extremely lightweight and durable. Internally. The Conflict II Long Cast is powered with our CNC Gear Technology, and high quality stainless steel ball bearings. With the Superline Spool, no backing is needed because of the rubber gasket that keeps superlines from slipping. Features 4.8.1 ratio 18lb max drag 365y x 12lb mono Rigid resin rr30 body and rotor superline spool 7+1 sealed stainless ball bearing system Line capcity rings
Penn Conflict II 7000 LC Longcast Penn Conflict II 7000 LC Longcast save
£209.99
£189.99
Combo Up. Buy a rod & reel for 5% off
1 in stock
Penn Conflict II 7000 LC   The New Penn Conflict II 7000 & 8000 LC is going to take 2019 by storm for all beach anglers. With 20lb of drag this reel will cope with all you can throw at it. The New PENN Conflict II Long Cast features stealthy cosmetics, a Lightweight design, and silky smooth HT-100 drag. The RR30 Rigid resin body and rotor are extremely lightweight and durable. Internally. The Conflict II Long Cast is powered with our CNC Gear Technology, and high quality stainless steel ball bearings. With the Superline Spool, no backing is needed because of the rubber gasket that keeps superlines from slipping. Features 4.3.1 ratio 20lb max drag 480y x 12lb mono Rigid resin rr30 body and rotor superline spool 7+1 sealed stainless ball bearing system Line capcity rings
Penn Conflict II 8000 LC Longcast Penn Conflict II 8000 LC Longcast save
£219.99
£199.99
Combo Up. Buy a rod & reel for 5% off
5 in stock
Penn Conflict II 8000 LC The New Penn Conflict II 7000 & 8000 LC is going to take 2019 by storm for all beach anglers. With 20lb + of drag this reel will cope with all you can throw at it. The New PENN Conflict II Long Cast features stealthy cosmetics, a Lightweight design, and silky smooth HT-100 drag. The RR30 Rigid resin body and rotor are extremely lightweight and durable. Internally. The Conflict II Long Cast is powered with our CNC Gear Technology, and high quality stainless steel ball bearings. With the Superline Spool, no backing is needed because of the rubber gasket that keeps superlines from slipping. Features 4.3.1 ratio 22lb max drag 525y x 15lb mono Rigid resin rr30 body and rotor superline spool 7+1 sealed stainless ball bearing system Line capcity rings
Penn Spinfisher SSVI 3500 Penn Spinfisher SSVI 3500 save
£139.99
£129.99
Combo Up. Buy a rod & reel for 5% off
1 in stock
Penn Spinfisher SSVI 3500 (New Model) The New PENN Spinfisher VI features IPX5 sealing so whether it gets hit with a wave, or you let it ride in the spray all the way home, you don't have to worry about saltwater getting into the gearbox or drag system. The penn HT-100 drag washers are housed in a fully sealed spool to give the stopping power needed for big saltwater fish. A Full Metal Body and sideplate keep the CNC Gear System in precise alignment under heavy loads. Available in standard, Live Liner, Long Cast models The new spinfisher range is set to take 2019 by storm as one of the must have reels Features: 6.2.1 Ratio 220y x 10lb mono  -   270y x 15lb braid  15lb Max Drag Full Metal Body Superline Spool Line Capacity Rings 5+1 sealed stainless steel ball bearing system HT-100™ carbon fiber drag washers CNC Gear™ technology IPX5 Sealed body and spool design
Penn Spinfisher SSVI 4500 Penn Spinfisher SSVI 4500 save
£149.99
£129.99
Combo Up. Buy a rod & reel for 5% off
2 in stock
Penn Spinfisher SSVI 4500 (New Model) The New PENN Spinfisher VI features IPX5 sealing so whether it gets hit with a wave, or you let it ride in the spray all the way home, you don't have to worry about saltwater getting into the gearbox or drag system. The penn HT-100 drag washers are housed in a fully sealed spool to give the stopping power needed for big saltwater fish. A Full Metal Body and sideplate keep the CNC Gear System in precise alignment under heavy loads. Available in standard, Live Liner, Long Cast models The new spinfisher range is set to take 2019 by storm as one of the must have reels Features 6.2.1 Ratio 320y x 10lb mono  -   320y x 20lb braid  12lb Max Drag Full Metal Body Line Capacity Rings CNC Gear™ technology IPX5 Sealed body and spool design 5+1 sealed stainless steel ball bearing system
Penn Spinfisher SSVI 6500 Penn Spinfisher SSVI 6500 save
£169.99
£149.99
Combo Up. Buy a rod & reel for 5% off
2 in stock
Penn Spinfisher SSVI 6500 (New Model) The New PENN Spinfisher VI features IPX5 sealing so whether it gets hit with a wave, or you let it ride in the spray all the way home, you don't have to worry about saltwater getting into the gearbox or drag system. The penn HT-100 drag washers are housed in a fully sealed spool to give the stopping power needed for big saltwater fish.This reel is really the business for big fish! A Full Metal Body and sideplate keep the CNC Gear System in precise alignment under heavy loads. Available in standard, Live Liner, Long Cast models The new spinfisher range is set to take 2019 by storm as one of the must have reels Features 5.6.1 Ratio 345y x 15lb mono  -  410y x 40lb braid  30lb Max Drag Full Metal Body Line Capacity Rings CNC Gear™ technology IPX5 Sealed body and spool design 5+1 sealed stainless steel ball bearing system
Rovex Ceratec 3000FD Match Rovex Ceratec 3000FD Match save
£39.99
£29.99
Combo Up. Buy a rod & reel for 5% off
1 in stock
Rovex Ceratec 3000 Match Rovex Ceratec Front Drag Reels "All singing and all dancing" the Rovex Ceratec 3000 Match reel offers a phenomenal specification reel built to the demanding standards that we expect from Rovex all at a very affordable price. With five ball bearings the reel gives silky smooth rotation coupled with a high retrieve ratio make this the ideal choice for the discerning match angler. The reel comes complete with two specially designed alumium shallow match spools and both a single and a double handle to suit all preferences. features - 5.2.1 Ratio 142y  x  6lb line 5 Ball Bearing System 2 Alu Spool 2 Alu handles one single + one double Infinite anti-reverse Stainless steel main shaft
Shimano Baitrunner D Reels Shimano Baitrunner D Reels freepost
£154.99
Combo Up. Buy a rod & reel for 5% off
1 in stock
Shimano Baitrunner D, reels with USA and EU choices of handles, the EU's have a T style non slip handle that is smaller than the USA style thats with a bulbus bigger oval style that is made for the bigger species when you have slippy hands. Known widely as the ‘USA Baitrunner’ the new BTR D series reel has achieved the near-impossible by updating and upgrading a true ‘old school’ classic. New colours design and enhanced performance are sure to spark further waves of worldwide acclaim. Packing enough power to use for saltwater vertical jigging as well as more traditional freshwater specimen tasks. An improved classic? You’d better believe it! Features: • XT-7 Body and Rotor • One piece bail wire • Cold forged aluminium spool and gear • Waterproof drag - Shielded AR-B • Maintenance port • Single machined aluminium handle 4000D Weight - 385g Gear ratio - 4.8:1 Line capacity - 200 yards of 10lb 6000D Weight - 570g Gear ratio - 4.8:1 Line capacity - 265 yards of 12lb 6000D EU T-bar handle Weight - 570g Gear ratio - 4.8:1 Line capacity - 265 yards of 12lb 8000D Weight -615g Gear ratio - 4.8:1 Line capacity -250 yards of 17lb line. 8000DEU T-Bar handle Weight - 615g Gear ratio - 4.8:1 Line capacity - 250 yards of 17lb line. * Please note Picture is just for illustration purposes only *
Shimano Saragosa 10000SW Shimano Saragosa 10000SW freepost
£244.99
£224.99
Combo Up. Buy a rod & reel for 5% off
Available to order
Shimano Saragosa 10000 SW The Saragosa SW is designed and built for the demands of all saltwater game anglers. The smaller sizes are perfect for casting, spinning and jigging whilst the 20000 and 25000 sizes, with their rigid support cross carbon drags are perfect for large bluewater game fish like tuna. Packed with the best Shimano features including X-ship and HD gear, the Saragosa SW also features X-shield waterproof body and drag to protect it from the harsh saltwater environment. Features; Capacity 320yds 16lb mono Capacity 360yds 50lb power Pro braid Ratio 4.9:1 5 x A-RB stainless steel ball bearings 1 x Roller bearing Dyna balance Direct Drive Mechanism X shield water resistance system

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.