Moulds & Accessories

4 IN 1 Distance Mould Please use loops named: Gerrys Galanised Lead Loops: Code AA0917 These great moulds allow you to make 4 different sizes of plain beach leads at once. Available in the following 3 sizes. - 1.5oz 2.25oz 3oz & 4oz - 2oz 2.5oz 3.5oz & 4.5oz - 3oz 4oz 5oz & 6oz.

The Splash Down allows a baited hook to be locked directly behind the sinker until impact with the sea. 100% Reliable Secure bait clip. Releases every time Precision engineered and aerodynamic Ideal for off the ground casting In flight stability Easy to assemble and use This pack contains everything to get you up and running to produce your new Gemini Splash Down sinkers. The concise instruction sheet contains a step by step guide of casting techniques and guides for safety will see you through the satisfaction of making your own weights with the minimum of fuss. Mould kit contents:- 1 x Splash Down mould (2 Piece aluminium alloy) 1 x Mould sizing spacer 5 x Splash Down bait clip assemblies 5 x Stainless steel tail wires (1 x 130mm 3 x 150mm 1 x 170mm) 5 x Breakout heads (1 x green 3 x blue 1 x red) 20 x Standard stainless steel breakout grips Full Instructions

Ball Weight Mould This mould produces high quality ball weights in a variety of different sizes. Please use code: AA0917 for correct lead loops The 6+8oz is a 2 in 1  mould. All other sizes are singles.  Instructions enclosed.            

These great tail wires have been primarily designed for our breakout mould but can be used on a wide range of moulds. There are two types. The standard tail wire and another with a bait clip. 50 per pkt

This unique fish scale tape is stuck onto the side of the in-line pirks to give them a Lifelike  fish-scale effect. 10 per pkt

System 100+ Glow In The Dark Heads And Grips (No Tail Wires) New to the Gemini range is our Glow In The Dark products. This kit will allow you to simply remove your existing breakout heads, from your Gemini sinkers, and replace them with Glow In The Dark ones. This kit contains 10 Glow In The Dark heads, 40 standard grips with Glow In The Dark PVC. The ultimate way of tracing your cast at night, with an exceptionally powerful glow that will last up to 45 minutes per charge. This product will also act as an attractant to fish in clearer waters, luring fish to the sea bed and in turn your hook bait. As shown by Team England, when they fished the World Championships in 2011. This kit comprises of 10 glow in the dark breakout heads, 40 standard breakout grips and glow in the dark PVC. Fully interchangeable with all Gemini System 100+ sinkers. The glow in the dark facility is easily rechargeable with torch, flash, sunlight or similar. Product Code. G1004

A Splash Down assembly kit for making your own Splash Down sinkers. Assembly kit contents include:- 10 x Splash Down bait clips 10 x Breakout heads 10 x Splash Down tail wires 40 x Standard stainless steel grips PVC Available as green (130g/4.5oz) blue (150g/5oz) or red (170g/6oz).

The Fixed grip wires give the maximum amount of grip because of the distance of the grip wire from the mass of the sinker, and are consequently least suitable for casting. They are therefore mainly used from piers and boats where the tidal flow is strong, but because of the height of the fisherman from the sea bed, they can be virtually lifted out of position and are not required to be dragged across a large expanse of obstacle strewn shallow water upon retrieval. However, given the right conditions they are suitable for casting. The fixed grip wires are straight when you get them and can be bent to the required shape. We consider the curved shape illustrated on this page to be the optimum for gripping power, but the choice is yours! Also, the wires can be cut shorter and/or the sleeving removed to alter the dynamics of the sinker as required. The Anti-Snag Fixed Grips are made from a 1.2mm stainless steel wire that holds well in strong currents. This variation of Fixed Grip Heads will give against snags upon retrieval, making it suitable for beach fishing. Anti-Snag Fixed Grip Kit Contents: •4 x Anti-Snag Fixed Grip Heads •16 x Anti-Snag Fixed Grip wires •4 x Anti-Snag PVC Sleeve

A complete DIY kit to produce your own Gemini System 100+ Sinkers. The concise instruction sheet containing a step by step guide of moulding techniques and guides for safety will see you through the satisfaction of making your own weights with the minimum of fuss.Makes leads from 3-8oz. Gemini leads with all the adjustable heads wires tails etc are the best mould for grip we sell perfect for fast tides uptiding etc etc.  Mould Kit Contents: 1 x System 100+ Adjustable Mould  1 x Mould Spacer 5 x Long Tail Wires 5 x Black Breakout Heads 16 x Standard Breakout Grips 4 x Long Breakout Grips 1 x Full Detailed Instructions

Gemini Long Grip Assembly Kit 10 Sets Per Bag 2 Options - Yellow 190G and Black 210G

Side Grip Assembly Kit Black Long Tail Wires

The Fixed grip wires give the maximum amount of grip because of the distance of the grip wire from the mass of the sinker, and are consequently least suitable for casting. They are therefore mainly used from piers and boats where the tidal flow is strong, but because of the height of the fisherman from the sea bed, they can be virtually lifted out of position and are not required to be dragged across a large expanse of obstacle strewn shallow water upon retrieval. However, given the right conditions they are suitable for casting. The fixed grip wires are straight when you get them and can be bent to the required shape. We consider the curved shape illustrated on this page to be the optimum for gripping power, but the choice is yours! Also, the wires can be cut shorter and/or the sleeving removed to alter the dynamics of the sinker as required. The Springy fixed grip wires are made from 1.2mm sprung stainless steel wire and are ideal for pier and boat fishing. Springy Fixed Grip Kit Contents: •4 x Springy Fixed Grip Heads •16 x Springy Fixed Grip Wires •4 x Springy PVC Sleeve

Tail wires with screw thread for use in gemini moulds Approximately 95mm excluding screw Sold in 10`s

The complete accessory kit to make your gemini leads.short or long tails Contains - 10 x tail wires 10 x side wires 10 x heads in each kit cols blue red yellow green or black

Gemini Sinker System 100+ inc weights the angler can take a complete range of sinkers to suit any condition on his fishing trip be it from boat beach or pier and all from a box that weighs less than 4½lbs (2.3kg) and only measures 230mm (9) x 190mm (7½) x 50mm (2)+ full range of accessories to make up a number of different sinker combinations using gemini`s unique inter changable heads

System 100+ Carry Box With Breakout Sinker Mould The System 100+ Breakout Sinker mould complete with a range of System 100+ sinker accessories in a sturdy compact carry box. This Complete DIY mould kit will allow you to produce your very own 90g, 110g, 130g, 150g, 170g, 190g and 210g Gemini System 100+ Breakout Sinkers. The mould is fully adjustable (allows you to make various size sinkers), easy to use and comes with full instructions that will guide you through the full process. System 100+ Carry Box With Mould Contents: • 1 x System 100+ adjustable mould • 1 x Mould spacer • 1 x DD fixed grip head • 1 x Springy fixed grip head • 2 x Anti Snag fixed grip head • 1 x Uptide insert - Long • 3 x Uptide insert - Short • 6 x Black breakout heads • 2 x Yellow breakout heads • 2 x Red breakout heads • 3 x Blue breakout heads • 1 x Green breakout heads • 4 x Plain nose cones • 7 x Long tail wires • 3 x Short tail wires • 4 sets of standard breakout grips • 4 sets of long breakout grips • 4 sets of extra long breakout grips • 4 sets of side breakout grips Safety instructions and moulding techniques are also included allowing you the satisfaction of creating your own sinkers in a safe and secure manor.

Gerrys Bucket Mould Thsi mould make a bucket shaped sinker that casts well and offers some  grip on the sea bed. But not like wired lead the bucket can be moved  to entice bites , either by you winding in some line or just by tide pull . The length of tail helps with the grip also help reduce the risk of the rig tangling. Moving a bait can help catch on difficult days but without the loss of grip. Also great for fishing over snags. Features : 3 sizes of mould available  3oz ,4oz,5oz Single chamber mould Weight forward helps on the cast Flat back helps protect bait on impact Single tail wire

Dumpy Distance Mould Neat and compact, this new mould is based around the pear lead .With a weight forward profile but a compact lead. Fit long tail wire that help with a straighter cast ,and that can be useful with large baits that are likely to wobble when cast. A long tail help cut down on properties when a snood below the weight is used. Holds great in fast tides with the twin tensioned grip wires that snap open on retrieve allowing it to be pulled over stones and weeds without the wires catching in the sea bed. Features : Compact pear Profile Long tail wire Roller grip twin tensioned grip wires Weight forward long casting * Pound coin is just for size reference .The lead in the picture is 4 oz *

Gerrys Lead Pouring Ladle Perfect for adding lead into moulds.

Gerrys Norwegian Pirk Wires 21cm Single Cavity Norway Pirk Connector Wires - pack of 10 These wires will fit all three sizes of mould, 12oz, 16oz, 20oz.

This mould produces pear shape weights which are great for general boat fishing. Available in 8oz 12oz 16oz 24oz 32oz 48oz

Gerrys breakout mould is a great way to make your grip leads on the cheap. Available in 3, 4, 5, 6. 7oz To comlpete your mould you will need Rollers, Tail wires and Grip Wires

Neat plastic rollers to fit  breakout mould in four colours enabling you to colour code you leads  . 400 per packet. Colours available Red Blue Yellow Green

Grip wires to fit the breakout mould. Simply feed in wire through the mould and bend into place. Available in 6 or 7 inch. 100 per pkt  

Gerrys Stainless Loops 100 Stainless loops to fit most moulds . Please note: These loops are of a medium gage.

Gerrys Inline Pirk Mould Spare Wires 19cm Great wires to fit inline pirk mould. Pkt of 10

Lead Makers Gloves These Heat resistant protective gloves are perfect for the DIY lead maker , longer length to protect wrists from accidental splash. Constructed from a tough sot feel leather ,with a soft lining for extra comfort and protection. Features : Reinforced Stitching Heat resistant Gauntlet Style Longer length for extra protection EN 407:2004 Heat Resistant One size fits all * Ladle not included *

Lumi Dip Powder Coat Super fine plastic coating powder that produces a professional and very effective finnish to Pirks ,Jigs and leads. A two part coating process to coat your pirk or jig . Full instructions are ncluded to give you that professional finnish REMEMBER: Lumi coating needs charging to glow brightly. Natural sunshine will only do so much, have a torch in your box and inbetween drops hold the torch against your lure moving up and down to recharge your pirk/jig. A Uv torch gives the best results

Sturdy and strong mould clamp which fits the majority of moulds.

Spare loops for our own Quick drop mould and will also fit Bo-Pedo moulds. pkts of 100