Garbolino Silicone Tube 1m

Garbolino Silicone Tube (1m Bulk)

The Garbolino Silicone Tube (1m) is the cost-effective, bulk-length solution for the dedicated rig builder. Unlike pre-cut packs, this 1-meter continuous sleeve allows you to cut your own custom lengths to suit specific float styles, whether you prefer ultra-short “pips” for fine-wire stems or long, protective sleeves for heavy margin floats.

Manufactured from extra-flexible, 100% transparent silicone, this tubing is designed to offer a “friction-lock” grip on float stems without damaging the line or the float. Its transparency is a key technical feature, ensuring that your terminal tackle remains as discreet as possible in clear water conditions.

Technical Specifications

Key Performance Features

• Custom Length Versatility: With a full meter of tubing, you have the freedom to use longer sections (10–15mm) on the base of the stem to prevent line tangles, or tiny 2mm sections for the top of the stem to maintain a minimalist profile.

• Extensive Diameter Range: Available in a massive range of sizes. The 0.3mm–0.5mm sizes are perfect for fine wire stems; 0.6mm–0.8mm are the standard for carbon and glass; while the 1.0mm–2.0mm sizes are ideal for heavy-duty specimen floats and protecting knots on feeder rigs.

• Non-Slip Memory: The high-elasticity silicone can be stretched over stems slightly larger than its bore, creating a “memory effect” that grips the stem securely. This ensures your float won’t move even when striking into large fish or dragging the rig through weeds.

• Line-Safe Smoothness: The interior of the tube is perfectly smooth, allowing you to slide the float up and down the line for depth adjustments without the risk of “pigtailing” or weakening your monofilament.

• UV Resistant: This technical silicone is treated to resist the perishing effects of UV light and water treatments, staying flexible and clear session after session.

Ideal Usage Scenarios

• Mass Rig Production: The 1m length is the professional’s choice for building dozens of rigs during the close season or preparing for a big festival.

• Heavy Margin & Carp Rigs: Use the larger diameters (1.0mm+) on thick carbon stems for “bagging” sessions where durability and grip are paramount.

• Knot Protection: The larger sizes also serve as excellent shock-absorbing sleeves over swivel knots on feeder or bomb setups.

• Technical Float Stabilization: Perfect for creating a “three-point” attachment (top, middle, and bottom of the stem) to ensure the float sits perfectly vertical in the water.

Gerry’s Tip: When using the 1m bulk tube, I always keep a sharp pair of braid scissors handy to ensure a perfectly clean, square cut. If you’re building rigs for deep water, try using a slightly longer piece of silicone at the bottom of the stem—this extra surface area creates more friction, preventing the weight of a large bulk of shot from pulling the float out of position