Description
The Preston Innovations Competition XS 4 Rod Holdall (165cm) is a heavy-duty ready-rod storage solution designed for anglers carrying multiple short or multi-piece rod setups. Built from hard-wearing, water-resistant outer fabric with reinforced high-stress areas, it provides total protection for delicate tips, line guides, and reels during transport.
Measuring 166 x 22 x 25cm, its compact profile accommodates up to four fully rigged short feeder or float rods, with internal dividers and securing straps to prevent reels and blanks from knocking together on the way to your peg.
Technical Specifications
| Feature | Specification |
| Dimensions | 166cm (L) x 22cm (W) x 25cm (H) |
| Capacity | Holds up to 4 fully made-up rods with reels attached |
| Outer Material | Hard-wearing, heavy-duty synthetic matrix |
| Internal Protection | Internal padded dividers & Velcro rod retention straps |
| Reel Protection | Sculpted reel cavity for match and feeder reels |
| Carrying System | Adjustable padded shoulder strap & reinforced grab handles |
| Zips & Fastenings | Heavy-duty, smooth-gliding branded zips |
Key Features & Performance
-
165cm Compact Ready-Rod Profile: Purpose-built for 9ft, 10ft, and 11ft two-piece rods (or 3-piece 12ft setups) broken down, allowing you to travel fully rigged without carrying unnecessary holdall length.
-
Internal Divider & Strap System: Features padded internal dividers and heavy-duty Velcro retention straps to isolate each rod and reel, eliminating line guide tangles and spool scratches.
-
Sculpted Reel Cavity: Generously proportioned reel compartment easily accommodates four 3000, 4000, or 5000 size feeder reels with handles folded down.
-
Reinforced Stress Zones: All load-bearing seams, webbing anchor joints, and zipper paths feature double-stitched reinforcements to handle the weight of multiple rigged setups.
-
Ergonomic Transportation: Fitted with a padded, non-slip shoulder strap for long peg walks, plus reinforced grab handles for effortless lifting in and out of car boots or shuttles.
Ideal Applications
-
Commercial Feeder & Pellet Waggler Setups: Carry short 9ft, 10ft, or 11ft commercial carp and F1 ready-rods fully rigged for instant setup on arrival.
-
Compact Vehicle & Shuttle Transport: The shorter 165cm profile fits across small-to-medium car boots much easier than full-length 195cm holdalls.
-
Multi-Rod Commercial Matches: Keep backup bomb, method feeder, and float rods assembled on side trays, ready to switch tactics in seconds.
Pro Tip
Staggering Reels for a Slim Profile: When packing four made-up rods, alternate their positions so two rod butts rest flat at the base and the other two sit slightly offset using adjustable neoprene rod bands. Staggering the reel bodies prevents four reels from clashing at the same height, making the holdall much slimmer, easier to zip up, and far more comfortable to carry over your shoulder.
Frequently Asked Questions
What rod lengths will fit inside the 165cm holdall when made up?
This holdall is ideal for two-piece rods up to 10ft or 11ft in length (which break down to around 155cm–165cm), as well as three-piece 12ft or 13ft rods. For 12ft two-piece rods, the longer 195cm Competition XS holdall is recommended.
Will 5000-size feeder reels fit in the reel section?
Yes. The sculpted reel compartment provides deep clearance to easily house four modern 3000 to 5000 size feeder reels with folded handles without putting strain on the zippers.
Is the bottom of the holdall protected against wet ground?
Yes. The base features a heavy-duty reinforced waterproof boot plate that stops dampness seeping up into the fabric and prevents wear from rough gravel or concrete car parks.
