NuFish Elastic Threader

NuFish Elastic Threader | Essential Pole Maintenance at Gerry’s Fishing

Make re-elasticating your pole a breeze with the NuFish Elastic Threader. Here at Gerry’s Fishing, we know that changing pole elastics can often be a frustrating and time-consuming task, especially when dealing with damp internal carbon walls or thick, sticky hollow elastics. This essential 3-metre tool is designed to eliminate the struggle entirely, allowing you to thread your top kits flawlessly in a matter of seconds.

Whether you are meticulously preparing your gear in the garage for a weekend match or making a quick, critical bankside repair after a breakage, this simple yet highly effective threader is an absolute must-have accessory for every dedicated pole angler’s seatbox.

Key Features

• Generous 3-Metre Length: At a full 3 metres long, it easily accommodates standard two-piece top kits, short F1 kits, and even extended top-three sections.

• Friction-Free Operation: The smooth, flexible wire glides effortlessly down your carbon pole sections without scratching the internal walls or snagging on dried pole lube.

• Secure Diamond Eye: The specially designed capture loop securely grips both micro-fine solid elastics and heavy-duty hollow elastics without pinching or damaging the material.

• Ultimate Time-Saver: Turns a frustrating, gravity-dependent chore into a rapid, stress-free 10-second job.

• Highly Durable: Constructed from tough, kink-resistant wire that can be tightly coiled up for ultra-compact storage in your tackle box drawers.

Product Details & Practical Uses

The NuFish Elastic Threader is an absolute lifesaver for the modern match, club, and commercial angler. Gone are the days of trying to rely on gravity, feeding a heavy piece of mono down a top kit, and hoping it comes out the other end. With this dedicated tool, the process is incredibly positive and precise.

The practical application couldn’t be easier: simply feed the threader down through your top kit from the tip bush to the base. Once the wire emerges from the bottom, slot your new elastic through the eye of the threader, and smoothly pull the wire back out through the tip. Because the wire is stiff enough to push past any internal moisture or debris, yet flexible enough to roll away neatly when not in use, it ensures your elastic is seated perfectly without any twists. It is the ultimate utility tool for keeping your top kits performing at their absolute best.

Detailed Technical Specifications

Where to Use the NuFish Elastic Threader

• Home Tackle Preparation: Perfect for those pre-season evenings when you need to strip and replace the old, worn elastic across your entire arsenal of top kits.

• Bankside Emergencies: If your elastic snaps midway through a crucial match, this tool allows you to thread a fresh length of elastic in seconds, getting you back to catching fish without losing vital time.

• Commercial Carp Fisheries: When the weather warms up and the fish are fighting harder than expected, you can quickly step up to a heavier hollow elastic right there on the bank.

• Winter Silverfish Leagues: The ultra-fine profile easily passes through the tiniest micro PTFE bushes used for light solid elastics when targeting winter roach and skimmers.

Gerry’s Fishing Pro Tip: > Always feed the NuFish Elastic Threader into your top kit starting from the narrow tip end and pushing down to the wider base. Once it’s through, attach your elastic. Before you pull the elastic back up through the carbon section, apply a few drops of dedicated pole elastic lubricant directly into the base of the top kit. This reduces friction to almost zero, ensuring your brand-new elastic isn’t subjected to any friction burn as it’s pulled through the pole!

Frequently Asked Questions (FAQs)

Will the eye of the threader fit through very small PTFE tip bushes?

Yes, the threading eye is designed with a very low profile. By gently squeezing the loop, it will easily pass through even the finest micro PTFE bushes used for ultra-light solid elastics.

Is 3 metres long enough for a top 3 kit?

Absolutely. A standard modern top-two kit is generally around 2.4 to 2.7 metres long. At a full 3 metres, the NuFish threader provides more than enough length to easily reach through standard kits and most top-three configurations.

Will the wire kink and become unusable over time?

The threader is constructed from a specialized, high-quality wire designed to be heavily kink-resistant. As long as you coil it in a natural circle when storing it back in your seatbox, it will remain perfectly straight and fully functional for years.

Can I use this for thick 3mm or 4mm hollow elastics?

Yes. The capture loop is flexible and can be opened up slightly to accommodate the thickest hollow elastics on the market, securely pulling them through wide-bore commercial top kits without a problem.