Preston Innovations ICS In-Line Solid Pellet Feeders

Preston Innovations ICS In-Line Solid Pellet Feeders

Presenting a concentrated payload of micro pellets into deep water or past aggressive columns of nuisance silverfish requires a specialized feeder design. The Preston Innovations ICS In-Line Solid Pellet Feeders are premium, commercial-grade tactical feeders engineered precisely to protect your bait during its descent. By utilizing a rugged, solid-sided body construction, these feeders ensure that your loose feed remains entirely trapped inside the frame until it rests safely on the lake bed, delivering a perfectly localized trap right around your hook bait.

The true mechanical advantage of this feeder range is the integration of Preston’s revolutionary Inter Change System (ICS). This modular architecture allows you to completely swap your feeder sizes, weights, or even transition from a pellet feeder to an inline method or match cuboid in a matter of seconds—all without having to cut your line, dismantle your rig, or retie a single knot. Combined with strategically positioned water-intake holes at the rear of the chassis, this feeder allows water to filter through the pellet payload once it settles, creating a controlled, highly efficient release on the deck.

Detailed Specifications

• Product Type: Next-generation in-line commercial pellet feeder.

• System Architecture: Fully integrated Inter Change System (ICS) for rapid, tool-free swaps.

• Chassis Build: High-impact, heavy-duty solid polymer walls to completely shield bait from mid-water loss.

• Bait Release Mechanics: Precision-engineered entry holes located at the rear base to allow water flow-through once settled.

• Bait Compatibility: Explicitly optimized for micro pellets (1mm to 3mm) and softened pellets up to a substantial 9mm diameter.

• Body Sizes: Available in two distinct body profiles to perfectly tailor your bait volume to the daily feeding rate.

• Rig Configuration: In-line layout delivering true, self-hooking mechanics and peerless casting stability.

The ICS Quick-Swap Workflow

[Tail Rubber] ---> Slide off the stem ---> [Feeder Body] ---> Slide up the mainline ---> [Central Groove] ---> Unclip line & replace body instantly

Examples of Where to Use

• Deep-Water Commercial Crater Work: The absolute premier choice when targeting match carp and F1s holding in deep central tracks (ranging from 6 to 12 feet deep). Standard open-frame cage or method feeders can lose their payload as they cut through deep water columns; this solid body delivers 100% of your pellets directly to the bottom.

• Nuisance Silverfish Infestations: Perfect for venues absolutely teeming with aggressive, mid-water shoals of small roach and rudd. The solid-walled shielding prevents these small fish from stripping or scattering your bait as the feeder sinks, ensuring your trap lands intact for browsing carp.

• Cool-Water Winter Finesse Tactics: Ideal for winter and early spring campaigns when you need to strictly limit the volume of loose feed entering the peg. The compact body sizes allow you to present a micro-fleck of pellets right next to a bright expander, corn, or wafter hookbait without overfeeding sluggish fish.

Gerry’s Pro Tip

Pro Tip: When preparing your pellets for this solid feeder, make them slightly sticker than you would for a standard Method configuration! Dampen your micro or 2mm pellets thoroughly and add a dash of water-soluble liquid additive or sticky binder. When loading the feeder, slide your hookbait into the solid tube first, scoop the pellets over the top, and apply a firm, positive thumb pinch right at the open face. Because the rear water holes are precisely calculated to let moisture filter in from behind, a slightly stickier pellet cake will slowly expand and push your hookbait cleanly out into view, leaving a pristine, hyper-concentrated pile of food that carp cannot resist!

Frequently Asked Questions (FAQs)

Q: How does the Inter Change System (ICS) work during a session?

A: The ICS system relies on a central, hollow plastic stem that stays permanently threaded onto your mainline. The weighted metal and plastic feeder body features a full-length lateral slot. To swap your feeder, you simply slide the soft rubber tail sleeve off the stem, slide the feeder body up your line slightly, unclip it through the open slot, and snap on a different ICS product. It takes under five seconds and completely eliminates the need to rebuild your rig.

Q: Can this feeder comfortably handle larger hookbaits like 8mm hard pellets or corn?

A: Yes, absolutely. While the feeder is primarily loaded with micro or softened 2mm pellets, the open front aperture is wide enough to comfortably hold and cleanly deploy substantial hookbaits—including 6mm to 8mm hard pellets, durable expanders, bright sweetcorn grains, mini dumbbells, or balanced wafters—without them getting wedged or trapped inside the capsule.

Q: Why are the entry holes positioned at the back of the feeder instead of the sides?

A: If holes were placed along the sides, water rushing past the feeder during its downward flight would prematurely wash the pellets out into mid-water, ruining your accuracy. By placing the holes exclusively at the rear base, the payload is completely shielded from air and water friction during the cast. Once the feeder settles flat on the lake bed, water enters from the back, pushing the expanding, softened pellets forward out of the main opening.