Description
Breakaway AC1 Adjustable Crimps: The Ultimate Rig Customization Tool
Rig versatility is a major advantage in competitive and recreational sea angling. At Gerry’s Fishing, we are excited to offer the Breakaway AC1 Adjustable Crimps. These are not your standard “one-and-done” fixed crimps; they are a sophisticated system that allows for infinite adjustment of your snoods and bait stops without ever damaging your rig body.
The AC1 system consists of high-quality black crimps and tapered, pre-formed rubber inserts. By combining these, you create a sliding connection that can be locked into place with a simple squeeze, yet moved whenever necessary. Whether you need to shift your hook positions to find where the fish are feeding or adjust your bait stops for different sized baits, the AC1 makes it possible in seconds.
Detailed Specifications
| Feature | Specification |
| Product Type | Adjustable Snood/Bait Stop System |
| Line Compatibility | Up to 80lb Monofilament |
| Quantity | 20 Crimps and 20 Rubbers per packet |
| Material | Corrosion-resistant black alloy crimps |
| Feature | Non-damaging to rig body line |
| Primary Use | Sea fishing multi-hook rigs |
Key Benefits of the AC1 System
-
On-the-Fly Rig Changes: Want to convert a “3-up” flapper rig into a “2-up 1-down” setup? With the AC1, you don’t need to tie a new rig. Simply slide the crimps to your new desired positions.
-
Zero Line Damage: Traditional metal crimps can “bite” into the line, creating a weak spot. The AC1 uses a rubber buffer that grips the line through friction, preserving the full breaking strain of your rig body.
-
Adjustable Bait Stops: Perfect for use above the hook to keep baits from blowing up the line during a powerful cast. You can move the stop up or down to accommodate everything from a small piece of lugworm to a large cocktail bait.
-
Extended Rig Life: Because you aren’t kinking or damaging the line, your rig bodies last much longer. You can easily change snoods or hook lengths without discarding the main trace.
How to Use the AC1 Crimps
-
Push the tapered rubber insert through the black crimp until it reaches the shoulder.
-
Trim off the surplus rubber with a sharp pair of scissors or nippers.
-
Thread your rig body line (up to 80lb) through the rubber-lined crimp.
-
Slide the assembly to your desired position on the rig.
-
Gently squeeze the crimp with pliers until you achieve the desired level of friction. It should be tight enough to stay put during a cast, but still movable by hand with firm pressure.
Pro Tip from the Gerry’s Team
The “Searcher” Rig Strategy: When fishing a new venue, set your snoods at three different heights using AC1 crimps. If you find all your bites are coming on the bottom hook, you can quickly slide the top two crimps down to the bottom of the rig to create a “3-down” setup, concentrating all your baits in the active feeding zone without stopping to tie a new trace.
Frequently Asked Questions
Will they slip during a 100-yard cast?
If crimped correctly, the friction provided by the rubber insert is more than enough to hold a standard snood or bait stop in place during high-energy casts. The rubber “bites” onto the line without cutting it.
Can I reuse the crimps?
While designed to be set once per rig, if you don’t over-tighten them, you can often slide them many times throughout the life of the rig. If you need to move them permanently, just use pliers to slide them to the new position.
Do I need a special crimping tool?
No. A standard pair of flat-nose or needle-nose pliers is perfect. You aren’t trying to crush the metal into the line; you are just compressing the rubber onto the mono.
What is the maximum line size?
The AC1 is designed to work with lines up to 80lb monofilament, which covers almost all standard UK shore and boat rig bodies.
