Daiwa Pro F1 Cupping Kit 1.78m PTKF1CK-BU

The Daiwa Pro F1 Cupping Kit (1.78m / PTKF1CK-BU) is a specialized, ultra-rigid baiting solution engineered specifically for high-speed commercial carp and F1 match tactics.

Designed slightly shorter than Daiwa’s standard 1.8m Speed F1 top kits, this 1.78m length is deliberately offset so that once your Daiwa pole cup and adaptor are fitted, the cupping kit sits at the exact same length as your fishing top kits. This delivers 100% feeding accuracy, allowing you to drop groundbait, micro pellets, or maggots directly over your rig without any guesswork or displacement.

Detailed Specifications

Model Code: PTKF1CK-BU
Product Name: Daiwa Pro F1 Cupping Kit
Length: 1.78m
Material: High-grade, high-modulus carbon construction
Compatibility: Fits top-tier Daiwa UK pole ranges (including Air, Airity, Tournament, Spectron, and Connoisseur series)
Adaptor Fitment: Factory-sized tip diameter designed specifically to accept the standard Daiwa Pole Cup Adaptor

Where to Use

Commercial F1 & Carp Fisheries: Ideal for tight-margin feeding, shallow pole fishing, or drop-feeding over short to mid-range lines.
Precision Shallow Baiting: Essential when tapping small amounts of micro pellets or bait directly over a shallow float without spooking wary fish.
Match Racing Situations: Built with extreme rigidity to eliminate tip bounce and wobble, letting you dump bait quickly and get straight back to fishing.

Pro Tip

Match Your Top Kit Length Perfectly: Thread your preferred Daiwa cupping adaptor and cup onto the PTKF1CK-BU and line it up against your rigged F1 top kits. Because of the 1.78m starting length, the top lip of the cup will sit flush with the tip of your fishing rigs. Mark your main pole section with a small piece of tape at your hold point to guarantee pin-point bait delivery every single feed.

Frequently Asked Questions

Why is this cupping kit 1.78m instead of 1.80m?

The reduced 1.78m length compensates for the extra depth added when you install a pole cup and adaptor. Once fitted, the cup tip matches the end of your standard 1.8m F1 kits perfectly.

Will this cupping kit handle heavy loads of bait?

Yes. It features high-grade, reinforced carbon wall strength to handle heavy larger-capacity cups loaded with dense groundbait or heavy wet pellets without flex or drooping.

Does it come pre-fitted with a threaded adaptor or cup?

No, the tip is blank-built to the exact diameter required to accept standard press-fit or glue-in Daiwa Cup adaptors, letting you customize your cup setup to your preferred capacity.

Gift Vouchers

Visit Our Super Store

Flexible Payment Plans

Matrix MTX Carbon Section Protectors

Garbolino Suppra Speed 428 – 3.5m – 5 Sections

Daiwa Hydrolastic Dacron Connectors

Guru Paste Pole Pots

MAP TKS Big Bore Power Kits

Daiwa Pole Sock DSPS1

Preston Innovations Hollo Connectors

Drennan Super Slick Internal Bungee Bushes

Information

Support

Subscribe Newsletter

Chest Size Guide